A study of solid circulation rate in a circulating fluidized bed

An experimental investigation under cold condition was made to study the effects of some operating/design parameters and non-mechanical L valve configuration on the solid circulation rate in a 4.5 m tall, 0.15 m diameter circulating fluidized bed with riser flow rate varying from 1400 litres/min to 2000 litres/min and bed inventory from 15 kg to 25 kg of sand of average sizes 200 μm, 400 μm and 500 μm. Solid circulation rate was estimated by measuring velocity of sand particle travelling through a vertical Perspex tube section at the bottom of the return leg. It was found to be in the range of 2.8 to 12.3kg/m²s, 0.07 to 9.1kg/m²s and 0.12 to 2.23kg/m²s for sand sizes of 200 μm, 400 μm and 500 μm, respectively for a horizontal L valve. Two mathematical correlations have been developed from the experimental results to predict solid circulation rate as a function of riser flow rate, aeration flow rate, total bed inventory and particle size used.     

秦山核电厂蒸汽发生器水位控制试验

简要介绍了蒸汽发生器水位控制系统的运行方式和试验方法。试验项目包括旁通阀控制试验、主给水阀控制试验和旁通阀与主给水阀的切换试验。文中给出了试验结果,即在液位扰动和核动率扰动时,蒸汽发生器液位的变化过程。经过两个月的运行和瞬态试验,证明蒸汽发生器水位控制系统满足设计要求。     

Hard disc drive air bearing design: modified DIRECT algorithm and its application to slider air bearing surface optimization

Hard disk drives continue to increase in areal data density. This requires air bearing sliders with lower and lower flying heights (FH). Also the uniformity of the FH and the flatness of the roll profile with radius become more critical as the FH gets lower. By using modern optimization techniques, it is possible to optimize slider air bearing surface (ABS) designs according to multiple design goals. In this paper, we discuss two modifications to the DIRECT algorithm: one to handle tolerance and one to deal with hidden constraints. Some numerical experiments were carried out using these modifications and the modified DIRECT algorithm was applied to slider ABS optimization. The results show that these two modifications can improve the efficiency of the DIRECT algorithm and they also provide more flexibility in slider ABS optimization.     

新型无杆水力采油装置研制与应用

针对中原油田中后期开发存在的液面降低、泵挂加深使得抽油机载荷增加、冲程损失增大、杆管偏磨严重等问题,研制了新型无杆水力采油装置。该装置采用球阀换向,冲程长、冲次低。现场试验时SC38—74—4.8型无杆水力采油装置与常规管式抽油泵联用,下泵深度1650m,冲程4.8m,冲次2.7min-1,日注水量72m3,产出液60m3。结果表明,新型无杆水力采油装置延长了抽油泵的使用寿命,彻底根除了杆管偏磨,采用球阀换向,对动力液要求较低,日常维护简单。     

银川市室内环境空气污染现状及治理措施的初探

本文通过对银川市室内环境空气污染现状的调查与检测,阐述了室内环境空气污染的来源及危害,提出了污染治理措施。     

调节阀的闪蒸和气蚀

针对调节阀的闪蒸和气蚀问题，介绍了调节阀在选型和使用中的要点。     

空调压缩机用冲压外圈滚针轴承

着重分析空调压缩机采用新的环保型冷媒体后，常规结构滚针轴承的破坏情况，提出了冲压滚针轴承新的结构改进设计及其开发和性能比较结果，为今后新冷媒体空调压缩机的广泛使用，提供了有利的保证。     

复合多功能通风管道的性能及在空调系统中的应用

详细介绍了复合多功能通风管道的各种性能,并与薄钢板通风管道作了比较,指出了其在空调系系统中的推广应用具有广阔的发展前景。     

Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry     

烧结机双层插板式卸灰阀的研制

烧结机双层卸灰阀由蘑菇头式改为电液推杆插板式，有效地解决了系统卸料及漏风问题，实现了控制自动化，提高了设备作业率，改善了岗位环境。